设为首页 加入收藏
>> 地锚石模具
>> 镶边石模具
>> 路牙石塑料模具
>> 路沿石塑料模具
>> 路牙砖模具
地址: 保定市城东工业区
电话: 0312-8103818 18803129528
传真: 0312-8103818
邮箱: 107108222@qq.com
联系人: 边经理
QQ: 107108222
您现在的位置:首页->公司新闻->路缘石模具的使用步骤介绍

路缘石模具的使用步骤介绍

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

路缘石模具在于不同形式形状的模具用处不一样,路缘石模具常常用在公路两侧,属于防撞效果使用的,平缘石模具常常铺在便道上,为了硬化道路,这两种模具形状不同。立缘石模具与平缘石模具的区别还在于两种模具规格不同,立缘石塑料模具常常使用的是比较大的模具,长度多在75公分或者1米,而平缘石塑料模具的长度常常都是在50公分以下。按照每种模具使用不同的次数来分析,根据道路长短以及生产工期的时间来确定购买多少模具,这样就能合理的控制生产成本了。

The curb stone mould is used differently in different shapes. The curb stone mould is often used on both sides of the highway. It belongs to the anti-collision effect. The curb stone mould is often laid on the sidewalk. In order to harden the road, the two kinds of moulds have different shapes. The difference between upright margin stone mould and flat margin stone mould lies in the different specifications of the two kinds of mould. Vertical margin stone plastic mould often uses larger mould, the length of which is more than 75 cm or 1 m, while the length of flat margin stone plastic mould is often less than 50 cm. According to the number of times each die is used to analyze, according to the length of the road and the production time to determine how many molds to buy, so that the production cost can be reasonably controlled.

路缘石模具在按照侧石预制块的结构样式加工的,因为从路缘石模具的生产来看,具体尺寸和样式都是以实际图纸要求,既有常规型号也有异形的,所以需要准确阅读图纸才可以。路缘石模具不论是制作什么产品,都需要按照一定的操作步骤才能完成制作,这样在使用时就不会出现很多的问题,安装方便简单,业余施工方也可以完成安装。在使用前需要检查路缘石模具的表面是否完好平整,这样可以使制作的产品的表面光滑,在使用时不容易出现脱落的情况,更换的频率很低,这就给施工方省去了很多的麻烦。

The curb stone moulds are processed according to the structural style of the prefabricated block of curb stone, because from the production of curb stone moulds, the specific size and style are required by the actual drawings, both conventional models and special shapes, so it is necessary to read the drawings accurately. No matter what products the curb stone moulds are made, they need to follow certain operation steps to complete the production. In this way, there will be no many problems in use. The installation is convenient and simple, and amateur builders can also complete the installation. Before using, it is necessary to check whether the surface of the curb stone mould is intact and smooth, so that the surface of the product can be smooth, it is not easy to fall off when using, and the frequency of replacement is very low, which saves a lot of trouble to the construction party.

 


【上一个】 路缘石模具的使用细节特征 【下一个】 地锚石模具在购买过程中应注意哪些问题


 · 路缘石模具的使用细节特征 · 路缘石模具的使用步骤介绍
 · 路缘石模具

路牙石模具,水泥路牙石模具,塑料路牙石模具——保定乐丰路牙石模具厂 |排水沟模具|碎石机|智能家居加盟|流水槽模具|遮板模具|护坡模具|流水渠模具|护坡模具|